● Live Data
Black Lion Audio · Musical Instruments
Black Lion Audio PG-2 UK Power Conditioner
£499.00Fair Value1 stores tracked
Buy Signal
Price near historical average — neutral outlook
Confidence: 50/100
RSI (14)
—
Need 15+ data points
Volatility (ann.)
—
Need more data
30d Momentum
—
Need 30+ data points
Price Position
—
No 90d range data
EMA 20
—
EMA 50
—
Need 50+ data points
90d Low / High
—
30d Forecast
—
→ Stable
Product Fundamentals
- Clean power improves your audio The PG 2 UK uses PG 99 Filtering Technology and premium Panasonic and Wima capacitors to remove up to 99.7 percent of high frequency noise. This protects your signal from interference that can cause hiss hum or a loss in clarity. Many power conditioners only filter around 85 percent of this noise. By going further the PG 2 UK helps your gear perform more accurately and consistently. Power sequencing protects connected gear The PG 2 UK features time delayed switching for its analog and high current outlets. This means your amplifiers and monitors always power up last and turn off first. It prevents loud pops or speaker damage caused by power reaching your outputs too early. The eleven rear outlets are divided into groups for digital analogue and high current gear to make setup easier and safer. Every outlet is filtered and surge protected helping to extend the life of your equipment while keeping power noise low. Real time power status with built in alerts The front panel includes a voltage and current meter to help you keep an eye on your power conditions. LED indicators show grounding polarity noise filtering and surge protection status at a glance. If the voltage becomes unsafe an audio alarm sounds immediately so you can react quickly and protect your setup. Easy access and full rack coverage With eleven switched outlets on the back and one always on outlet on the front the PG 2 UK gives you full control over your rack power. There is also a USB charging port on the front for convenience and an XLR lamp output on the back for low light environments. Features Faithful recreation of three iconic mid-gain overdrive circuits in one compact pedal Selectable 808 TS9 and TS10 modes for distinct vintage overdrive flavors Mix knob blends clean and overdriven signals for added tonal control Pickup voicing switch optimizes response for single-coils or humbuckers Switchable true or buffered bypass for seamless pedalboard integration External voltage boost increases headroom for a cleaner punchier response Soft-clipping circuit design closely mimics the feel of classic tube amp breakup Loaded with JRC4558 op-amps discrete transistors JFETs and analog diodes Fully analog circuitry delivers warm dynamic vintage-inspired drive tones Perfect for clean boost edge-of-breakup or stacked gain tones Tested and assembled by hand in Austin Texas with a five-year warranty Works equally well in front of clean mid-gain or already breaking-up amps Delivers asymmetrical clipping for a harmonically rich overdrive texture Front-panel controls include level drive tone mix circuit selector and voicing options 9V center-negative power input with internal voltage doubler up to 18V Low power consumption at 12mA in standard mode and 25mA when boosted Output level reaches +2.1dBu at 9V and +9dBu at 18V for strong signal delivery Compact and durable enclosure measuring 5.1 inches wide by 2.75 inches tall by 2.63 inches deep Lightweight design at just 1 pound for easy pedalboard integration Specifications Type: Rackmount Number Of Outlets: 1 x Front 11 x Rear Voltage: 230VAC 10A Max AC Mains Input: Type UK Plug Width: 438 Mm (19&rdquo
- ) Height: 133 Mm (3U) Depth: 250 Mm Weight: 6.8 Kg Product Code: PG-2 UK
GearDeals Intelligence · Data from 0 historical price points · Analysis is informational only, not financial advice