● Live Data
EarthQuaker Devices · Bass Pedals
EarthQuaker Devices Scrolls Bass Odyssey
£348.00Fair Value2 stores tracked
Buy Signal
Price near historical average — neutral outlook
Confidence: 50/100
RSI (14)
—
Need 15+ data points
Volatility (ann.)
—
Need more data
30d Momentum
—
Need 30+ data points
Price Position
—
No 90d range data
EMA 20
—
EMA 50
—
Need 50+ data points
90d Low / High
—
30d Forecast
—
→ Stable
Product Fundamentals
- EarthQuaker Devices Scrolls Bass Odyssey
- Effect Pedal for Electric Guitar
- Drive
- EQ and cab simulator
- Audio tool for bass
- Enables the recreation of a wide variety of bass and amplifier combinations
- Powerful drive channel modelled on classic valve amplifiers
- High-quality EQ channel with active audiophile tone control options
- Quick access via the “Deep”, “Process” and “Bright” push-button switches
- Integrated effects loop
- Genuine relay-based bypass circuit
- Active buffered parallel output
- XLR output including analogue speaker simulation
- Suitable for “ampless” setups, where you can play directly into the mixing desk or audio interface
- EQ control “Level” (output volume), 'Vari' EQ control (boosts or cuts the selected frequency), 'Vari-Freq' EQ control (frequency control 20 – 10,000 Hz)
- EQ controls: Treble
- Bass
- Middle
- EQ “Deep” switch for boosting at 80 Hz
- EQ “Process” switch: attenuation of the lower midrange
- EQ “Bright” switch for boosting at 5,000 Hz
- Drive control “Level” output volume control
- The “Blend” control on the Drive channel mixes the unprocessed signal with the signal from the Drive channel
- Drive control “Bandwidth” control determines where the clipping is most pronounced
- Drive control “Tone” low-pass filter
- The Drive footswitch activates the Drive channel (featuring Flexi-Switch technology (Latch / Momentary mode))
- The EQ footswitch activates the EQ channel
- Input and output: 6.3 mm jack
- Direct output with speaker simulation: XLR
- Effects loop: 6.35 mm input and output
- Buffered parallel output: outputs the unprocessed signal to external devices (amp
- DI box, tuner)
- Status: LEDs (EQ and drive)
- Power supply via a 9 V DC mains adapter (not included
- 2.1 x 5.5 mm barrel connector, centre negative)
- Current consumption: 70 mA
- Dimensions (L x W x H): 121 x 114 x 57 mm
- Weight: 526 g
- Made in USA
GearDeals Intelligence · Data from 0 historical price points · Analysis is informational only, not financial advice
