GD
GD
← Back to product|Deep Intelligence Analysis
● Live Data
Warwick Stage Series DS 300
Warwick · Solid-State Bassheads

Warwick Stage Series DS 300

£609.00Fair Value2 stores tracked
Buy Signal
Fair Value
Price near historical average — neutral outlook
Confidence: 50/100
RSI (14)
Need 15+ data points
Volatility (ann.)
Need more data
30d Momentum
Need 30+ data points
Price Position
No 90d range data
EMA 20
EMA 50
Need 50+ data points
90d Low / High
30d Forecast
→ Stable
Price History
Current
£633
Change
-1.9%
Avg
£625
Low
£599
High
£645
Volatility
2.8%
Store Intelligence
ThomannThomann
£609.00
Buy
2BaxBax
£656.00
+7.7%
Buy
Price spread: £47.00 across 2 stores
AI Recommendation EngineRule-based · v1
Fair Value
Price near historical average — neutral outlook
Confidence: 50%
Reasons to Buy
Insufficient price history for analysis
Risks / Watch Out
No significant risk factors detected
Product Fundamentals
  • Warwick Stage Series DS 300
  • Bass Amplifier Head
  • Two channels
  • Power: 300 W into 4 ohm / 180 W into 8 ohm
  • With USB and Bluetooth interface
  • Transistor circuit
  • Class-D power amplifier
  • Built-in tuner
  • Speaker simulator
  • FX loop
  • Aux in
  • DI out
  • Bi-Amp line out
  • 4-band EQ with presets for mid-range
  • Including compressor control@+*Front:*
  • 2-channel tandem control for gain, bass, low mid, high mid, treble and volume
  • 2-channel Freq. selector switch for low-mid and high-mid
  • Channel switch
  • Compressor control for Amount / Level (Tandem)
  • Compressor switch
  • Bluetooth switch
  • Tuner switch
  • Tuner display for tuning
  • LED clip display
  • LED channel display
  • Mute switch
  • Headphone jack: 3.5 mm stereo
  • Two front-panel input jacks: 6.35 mm@+*Back:*
  • Power On / Off switch
  • AUX-IN connector (3.5 mm stereo)
  • SEND and RETURN connectors for effects loop (6.35 mm, mono) with separate level control
  • Balanced XLR DI output with pre/post EQ switch and ground lift switch
  • Cab Emulator selector switch (OFF + three modes)
  • Two Speaker Twist connectors on the rear
  • Line out connector (6.35 mm, mono) with full-range/bi-amp switch
  • USB-B interface
  • Footswitch connector for channel and compressor control
  • Mains cable connection (IEC socket)
  • Voltage selector: 120/240 VAC
  • Input voltage: 120–240 VAC / 50–60 Hz / 100 W
  • Dimensions (L x W x H): 250 x 270 x 74 mm
  • Weight: 3.32 kg
  • 230 V EU version incl. power cable with EU plug@+*Note:* This device may only be used in countries with a mains voltage of 120–230 V!
GearDeals Intelligence · Data from 0 historical price points · Analysis is informational only, not financial advice