● Live Data
Yamaha · Musical Instruments
Yamaha TIO1608-D2 Stagebox with Dante
£1492.00Fair Value1 stores tracked
Buy Signal
Price near historical average — neutral outlook
Confidence: 50/100
RSI (14)
—
Need 15+ data points
Volatility (ann.)
—
Need more data
30d Momentum
—
Need 30+ data points
Price Position
—
No 90d range data
EMA 20
—
EMA 50
—
Need 50+ data points
90d Low / High
—
30d Forecast
—
→ Stable
Product Fundamentals
- Dante-equipped stagebox With the Dante High Reliability Network Audio Protocol the TIO1608-D2 guarantees exceptional audio performance. Dante is renowned for its low jitter low latency and high sampling accuracy making it the go-to choice for leading manufacturers and professionals in the sound reinforcement industry. You dont need extensive IT networking knowledge to configure a high-performance Dante stagebox system with the TIO1608-D2. With the flexibility of the Dante network protocol you can easily connect TF Series or DM3 consoles to various Dante-enabled equipment such as R Series I/O racks. Complement your console Enhance the convenience of your console with the Yamaha TIO1608-D2 Stagebox. This Dante-compatible I/O rack is equipped with 16 mic/line inputs and 8 line outputs providing you with versatile audio connectivity options. One of its standout features is the ability to control gain remotely from TF Series and DM3 consoles allowing you to build a simple stagebox system. In combination with the optional NY64-D expansion card (sold separately) the TF Series can connect to up to three TIO1608-D2 units while the DM3 can connect to a single unit. By connecting the console and stagebox with a lightweight durable CAT5e Ethernet cable in a daisy chain you can ensure low-latency high-quality sound transmission without the hassle of analog snakes. Pristine recallable D-PRE preamps Experience exceptional sound quality with the TIO1608-D2 thanks to its recallable D-PRE preamplifiers. These preamps inherited from the TF Series deliver a consistent natural and musical sound throughout your entire audio system. Meticulous attention to detail and quality is evident in the mechanical construction circuit board layout power supply grounding and parts selection of the TIO1608-D2. Features 16-in 8-out digital stagebox for live or studio sound applications Equipped with Dante network connectivity for fast stable audio transmission Integration with Yamaha DM and TF-series mixers for quick and easy setup 16 mic/line inputs and 8 line outputs for simplifying wide-ranging audio setups Rapid and versatile input selection with all 16 inputs accepting signals from multiple locations Clean high headroom D-PRE preamps with recallability for easy and consistent sound mixing Up to 96 kHz audio for pristine sound quality Specifications Sample Rate: 44.1 kHz 48 kHz 88.2 kHz 96 kHz selectable Signal Delay: Less than 1.3 ms INPUT to OUTPUT connect with DM3 Dante Receive Latency set to 0.25 ms (one way) Fs &equals
- 96 kHz
- Less than 2.6 ms INPUT to OUTPUT connect with DM3 Dante Receive Latency set to 0.25 ms (one way) Fs &equals
- 48 kHz Total Harmonic Distortion: Less than 0.2&percnt
- &plus
- 4 dBu &commat
- 20 Hz - 20 kHz into 600&ohm
- Gain &equals
- &plus
- 66 dB / Less than 0.05&percnt
- &plus
- 4 dBU &commat
- 20Hz - 20kHz into 600&ohm
- Gain &equals
- -6 dB INPUT to OUTPUT Fs = 88.2 kHz 96kHz
- Less than 0.1&percnt
- &plus
- 4 dBu &commat
- 20 Hz - 20 kHz into 600&ohm
- Gain = &plus
- 66 dB / Less than 0.05&percnt
- &plus
- 4 dBU &commat
- 20 Hz - 20 kHz into 600&ohm
- Gain = -6 dB INPUT to OUTPUT Fs = 44.1 kHz 48 kHz *Measured with a -18 dB/octave filter &commat
- 80 kHz Dynamic Range: 108 dB Frequency Response: 20 Hz - 20 kHz Equivalent Input Noise: -128 dBu Gain &equals
- &plus
- 66 dB Fs 96 kHz 48 kHz *Measured with A-weighting filter Residual Output Noise: -86 dBu Fs 96 kHz / -88 dBu Fs 48 kHz ST main off *Measured with A-weighting filter Crosstalk: -100 dB adjacent INPUT/OUTPUT channels Input Gain &equals
- -6 dB *Measured with a -30 dB/octave filter &commat
- 22 kHz Heat Dissipation: 100 - 240 V 50/60 Hz. 43.5 kcal/h Power Requirements: 100 - 240 V 50/60 Hz Power Consumption: 50 W Dimensions (W x H x D): 480 x 88 x 364 mm (18.5 x 3.5 x 14.4") Weight: 5.7 kg (12.6 lbs)
GearDeals Intelligence · Data from 0 historical price points · Analysis is informational only, not financial advice