● Live Data
ART · Musical Instruments
ART SLA 2 – 200W Studio Power Amplifier
£541.00
Fair Value
1 stores trackedBuy Signal
Price near historical average — neutral outlook
Confidence: 50/100
RSI (14)
—
Need 15+ data points
Volatility (ann.)
—
Need more data
30d Momentum
—
Need 30+ data points
Price Position
—
No 90d range data
EMA 20
—
EMA 50
—
Need 50+ data points
90d Low / High
£541
High: £541.00
30d Forecast
—
→ Stable
◈ AI Recommendation EngineRule-based · v1
Fair Value
Price near historical average — neutral outlook
Confidence: 50%
Reasons to Buy
✓Near 90-day low — historically optimal entry point
✓Detailed product specifications available — transparent product information
Risks / Watch Out
✗Currently at or above the 90-day average price
✗Only 1 store carrying this product — limited price competition
Product Fundamentals
- A powerful amp for passive monitors Despite most studio setups incorporating active and powered monitoring systems you may prefer to use passive speakers to create and mix your music. If you own a passive monitoring system chances are you need a linear amplifier to power your speakers without interrupting or distorting the input signal. Providing superior sound quality the SLA-2 is a 400 Watt two-channel linear studio power amplifier with two binding post outputs that support standard speaker cables. On the front panel are two recessed "pop out" gain attenuators that can be pre-set and then shielded with an included anti-tamper faceplate. Utilising toroidal transformers the SLA 2 has a frequency range response of 10Hz to 40kHz. Versatile and innovative design To reduce interference and protect it from short circuits the ART SLA 2 is constructed with extremely low noise components and signal isolating circuitry an ultrasonic network decouples RF from the output to provide stability and prevent overloading with reactive loads. Additionally the SLA 2 is extremely stable with low impedance loads. It can support loads as low as four Ohms allowing you to connect a wider range of equipment that output quieter signals. With two different operating modes you can bridge channels one and two to obtain either stereo mode or bridged mono mode that delivers the full power of the amp in an 8-ohm load. Featuring Euroblock connectors two female XLR sockets and two TRS jack inputs you can connect almost any instrument or interface to the SLA 2 with ease and utilise the amp mode switch to change the amplifier operating mode. Intelligent SmartFan cooling Linear amplifiers maintain signal purity and integrity from the input to the output speaker to do this they draw a lot of power and the resulting accumulated heat from this can cause immediate and long-term hardware issues. To combat this the SLA 2 utilises SmartFan a thermal-dependent fan and convection cooling system that regulates the amplifiers temperature based on the internal ambient heat to prevent the unit from overheating and malfunctioning. Powered by an IEC cable and turned on/off with a switch on the front the SLA 2 is incredibly easy to set up and use. Taking up only 1U of rack space this compact high-quality and no-nonsense amplifier is the perfect tool to power your passive speakers in any studio or commercial application. Features Two-channel linear amplifier for powering passive speakers and studio monitors Professional grade linearity maintains input signal purity and integrity Choose between stereo and mono bridge amp modes for signal combination Low noise circuitry ensures minimum interference with audio signals Inputs include Euroblock connectors Female XLR sockets and four balanced TRS jacks Binding post outputs that host regular speaker cables 10Hz to 40kHz frequency response SmartFan cooling system regulates heat based on the internal ambient temperature Specifications Bridged Output Power 8 Ohms: 560 W MONO CMRR: >
- 60dB (typical @1kHz) Frequency Response: 10Hz to 40kHz +/- 0.5dB Total Harmonic Distortion: <
- 0.05 (typical) Hum and Noise: >
- 100dB below clipping Input Impedance: 44k ? (balanced) / 22k ? (unbalanced) Input Sensitivity: 1V for full power output into 8 ? Input/Output Connections: XLR Euroblock (bal) 1/4? TRS (bal/unbal) Stereo Output Power 4 ohms: 280 W RMS per channel Stereo Output Power 8 ohms: 200 W RMS per channel Transformer Type: Toroidal Dimensions (WxDxH): 44.5mm x 483mm x 190.5mm Weight: 19.8lbs (9.0kg) Power Requirements: 120VAC 60Hz 1000 W (max) Product code: ART-SLA2E4
GearDeals Intelligence · Data from 2 historical price points · Analysis is informational only, not financial advice