Doepfer A-112 Sampler / Wavetable Module

£180.48

Fair Value

1 stores tracked

Buy Signal

Price near historical average — neutral outlook

Confidence: 50/100

RSI (14)

—

Need 15+ data points

Volatility (ann.)

—

Need more data

30d Momentum

—

Need 30+ data points

Price Position

—

No 90d range data

EMA 20

—

EMA 50

—

Need 50+ data points

90d Low / High

£180

High: £180.48

30d Forecast

—

→ Stable

Store Intelligence

★

Gear 4 Musicused

£180.48

Price spread: £0.00 across 1 stores

◈ AI Recommendation EngineRule-based · v1

Fair Value

Price near historical average — neutral outlook

Confidence: 50%

Reasons to Buy

✓Near 90-day low — historically optimal entry point

✓Detailed product specifications available — transparent product information

Risks / Watch Out

✗Currently at or above the 90-day average price

✗Only 1 store carrying this product — limited price competition

Product Fundamentals

Sampler The A-112 samples at an 8-bit resolution giving samples a retro sound to them. There are two banks of samples and you can record audio directly into this module. There is memory on board to store samples after you turn the module off. A gate can be used to play the sample and the sample will play as long as the gate is high so you could patch a square wave in with the pulse width being modulated to create variable sample lengths. You can also manually play the sample by pressing the manual trig button. There are also some effects included like delays freeze reverse delay and pitch shifting. Wavetable The second mode of this module is wavetable mode. In this mode the input you wouldve recorded audio into now becomes a control for moving through the wavetable. Wavetables can be loaded to the module by using MIDI dump. This works very much like a lot of other wavetable synths. What makes this interesting is the fact you can use a recorded sample as a wavetable. This makes for a very exciting opportunity for experimentation and some interesting uses. For example recorded speech can be used and individual vowel sounds can be picked out if you use other modules such as LFOs and attenuators. This mode also presents some interesting uses for external control modules like ribbon controllers. Specifications Width: 10HP/50.5mm Depth: 100 mm (Measured from the rear side of the front panel) Current: +12V: +50mA -12V: -20mA Product Code: A-112v

GearDeals Intelligence · Data from 1 historical price points · Analysis is informational only, not financial advice