● Live Data
Doepfer · VCA Modules
Doepfer A-132-4 VCA/Mixer
£104.90
Fair Value
1 stores trackedBuy Signal
Price near historical average — neutral outlook
Confidence: 50/100
RSI (14)
—
Need 15+ data points
Volatility (ann.)
—
Need more data
30d Momentum
—
Need 30+ data points
Price Position
50%
Mid-range
EMA 20
—
EMA 50
—
Need 50+ data points
90d Low / High
£105
High: £104.90
30d Forecast
—
→ Stable
◈ AI Recommendation EngineRule-based · v1
Fair Value
Price near historical average — neutral outlook
Confidence: 50%
Reasons to Buy
✓Near 90-day low — historically optimal entry point
✓Detailed product specifications available — transparent product information
Risks / Watch Out
✗Currently at or above the 90-day average price
✗Only 1 store carrying this product — limited price competition
Product Fundamentals
- Doepfer A-132-4 VCA/Mixer
- Quad Exponential VCA / Mixer@+The module A-132-4 contains four identical voltage-controlled amplifiers (VCA) with exponential normalization. Each VCA has two control voltage inputs (CV1
- CV2), a signal input (In), and a signal output (Out). The control voltage inputs CV1.1 and the signal inputs In1 can be bridged with the control voltage input CV2.1 via internal jumpers and with the signal input In2. This circuit is also available between amplifiers 2 and 3 as well as between amplifiers 3 and 4. If this circuit is not desired, then the jumpers must be removed.@+@+@+In addition, the sum of all four outputs is available (lower left socket with the sum symbol). Therefore, amplifier 4 has only one control voltage input (CV4.1). If necessary, this socket can be bridged as control voltage input 2. Then the sum signal will no longer be available.@+@+@+For each VCA output a jumper is available, which determines whether the output signal of the corresponding VCA is added to the sum signal. By default, all four jumpers are set (all four VCA output signals are added). By removing one or more of the jumpers, you can select which VCA output is added to the sum. The bridges can also be replaced by switches.@+@+
- Four exponential VCAs
- Designed mainly for audio signals
- Sum of all four outputs is available
- Width: 6 HP
- Depth: 60 mm
- Power requirement: +30 mA (+12 V) / -20 mA (-12 V)
◉ From Our Partner Storescached 1h
Doepfer to debut eight new slimline Eurorack modules at Superbooth 2019 - MusicTech
MusicTech· 2552d ago
Doepfer Polyphonic Eurorack Modules Are Available Now! - synth anatomy
synth anatomy· 2614d ago
Doepfer expands A-100 line with five polyphonic Eurorack modules - MusicTech
MusicTech· 2612d ago
GearDeals Intelligence · Data from 2 historical price points · Analysis is informational only, not financial advice