Price updated 3 May 2026, 08:00
Mesa Boogie JP-2C 1x12 Combo Amp EU
Best available price
£4299.00
1 offer from 1 storeSee all offers ↓
Only available at Gear4music
Free shipping available on the cheapest offer
Fair Price· Near 90-day average
90d Low
£4299.00
Best seen
90d High
£4299.00
Worst seen
90d Average
£4299.00
Baseline
30d Forecast
—
→ Stable
Price History
Stores:
Deep Intelligence Analysis
RSI · Bollinger Bands · Buy/Sell Signal · News
Compare offers
| Price + Ship | Store | Price | Shipping | Stock | Condition | Rating | |
|---|---|---|---|---|---|---|---|
Best£4299.00 Free P&P | Best£4299.00 | Free | In stock | — | — |
Product Description
- Classic Mark IIC+ tones made practical The JP-2C 1x12 Combo centres on the Mark IIC+ circuit delivering the tight response and clarity that style is known for. Channel 1 focuses on clean tones with maximum headroom keeping your sound open and controlled. Channel 2 recreates the original IIC+ lead circuit for defined crunch rhythms while Channel 3 adds a warmer more compressed feel suited to lead playing. Each channel is purpose-built so you spend less time tweaking and more time playing. Flexible power for different spaces A global 100/60W power switch lets you adapt the amp to your environment. Run the full 100W for maximum headroom and authority on stage or switch down to 60W for rehearsals and smaller venues. The lower setting also allows the power section to work harder at reduced volumes which can feel more responsive under the fingers. This flexibility makes the JP-2C easier to use across a wide range of setups. Detailed shaping with dual graphic EQs Two independent 5-band graphic EQs can be assigned to any channel giving you accurate control over your sound. This setup allows you to keep separate EQ curves for rhythm and lead tones avoiding the compromises of shared controls. Each EQ can be bypassed or footswitched making quick changes straightforward during a set. It&rsquo
- s a practical way to fine-tune your sound without overcomplicating the front panel. Ready for modern recording and control The built-in CabClone DI provides direct outputs with multiple cabinet voicings making recording and silent practice simple. MIDI support allows you to store and recall amp settings including channels EQs reverb and effects loop. A tube-driven effects loop and channel-independent reverb round out the feature set giving you a combo that works comfortably in both traditional and modern rigs. Specifications Product Name & Format: 1.M2CX.EU.AB.CO Product Series: Mark Series Quick Overview Wattage: 100 Or 60 Watts Selectable (Global) Power Tube Type: 4x Mesa 6L6 Channels & Modes: 3 Channels / 3 Modes Mode Voicings/Styles: Ch. 1 = Mark IIC+ Clean Or Boost Ch. 2 = Mark IIC+ Gain Or Shred Ch. 3 = Mark IIC+ Gain Or Shred Channel Controls: Channel 1 Features: Independent Gain Treble Mid/Boost (Patent Applied For
- Doubles As A Standard Midrange Tone Control From 1 To 5 And A Variable Gain Boost Control From 5 To 10) Bass Presence Reverb (Rear Panel) Assignment Switch For Dual 5-Band Graphic EQs (EQ 1 Or EQ 2 - On Off Or Footswitchable) & Master Controls Channel 2 & 3 Features: Shred Mode (Assignment Switch In Lower Right Corner Of EQ Section - MIDI Switchable) Independent Gain With Pull Gain Boost Treble Middle Bass Presence With Pull Frequency Shift Reverb (Rear Panel) Assignment Switch For Dual 5-Band Graphic EQs (EQ 1 Or EQ 2 - On Off Or Footswitchable) & Master Controls Graphic EQ / Reverb / FX / Solo: Fully Buffered Series Tube FX Loop (MIDI Switchable) Footswitchable Functions: Ch. 1 Ch. 2 & Ch. 3 Reverb Graphic EQ 1 & Graphic EQ 2 Speaker(s) & Impedance: 1x12&rdquo
- Celestion Custom 90 Speaker &ndash
- 8 Ohms Weight: 59 Lbs. (26.76 Kg) Dimensions: 18 1/4&rdquo
- H X 18 3/4&rdquo
- W X 11 1/2&rdquo
- D / 46.36 Cm H X 47.63 Cm W X 29.21 Cm D Amplifier Features Amp Type: Tube Chassis Material: Aluminum Rectifier Type: Silicon Diodes Rectifier Tube(s): N/A Variac Power Switch: N/A Preamp Tubes: 5x Mesa 12AX7 Power Amp Tubes: 4x Mesa 6L6 Bias Switch For Alternate Power Tube Types: N/A Maintenance Free Fixed Bias: Yes Wattage(s) Quick Reference: 100 Or 60 Watts Via 100/60 Watt Global Power Switch Built-In Power Amp Attenuation: N/A Power Amp Details (Class & Wattage): Class A/B Power With Selectable Global 100/60 Power Switch Cooling: Convection Channel EQ & Effects Number Of Footswitchable Channels (Or Modes): Three Channels Via 6 Button Footswitch Number Of Style Modes: Three Number Of Style Modes Per Channel: Two Types Of Style Modes Per Channel: Ch. 1 = Mark IIC+ Clean Or Boost Ch. 2 = Mark IIC+ Gain Or Shred Ch. 3 = Mark IIC+ Gain Or Shred Graphic EQ And/Or Contour: Two Selectable 5-Band Graphic EQs (Footswitchable Channel Assignable Or Off) Reverb / Effects & Bypass Options: Footswitchable All-Tube Long-Tank Spring Reverb With Independent Channel Controls Effects Loop & Bypass Options: Fully Buffered Series Tube FX Loop (MIDI Switchable) Output & Connectivity Global Output Level Control: N/A Global Solo Level Control: N/A True-Bypass Options: N/A Tuner Output: N/A External Switching Jack Options And/Or MIDI: MIDI Switchable/Programmable Via Control Change And Program Change With 256 Presets Speaker Outputs: One 16 Ohm One 8 Ohm And Two 4 Ohm Cabinet Simulation - Direct Live/Recording Output: Built-In Mesa CabClone&trade
- With Internal Amp Load & Headphone Output Internal Amp Load (For Speaker-Less Performance): Yes Headphone Output: Yes Slave Output: Yes Accessories Footswitch: Included - 3x3 - 6 Button Footswitch (Ch. 1 2 3 Reverb EQ 1 EQ 2) Slipcover: Included - Fitted Slipcover Cabinet Features Cabinet Material: Marine Grade Baltic Birch Standard Finish Options (No Extra Cost): Black Bronco Vinyl Black Jute Grille Black Handle & Corners Custom Finish Options: See Custom Finish Gallery Speaker(s) & Impedance: 1 - 8 Ohm Celestion Custom 90 / Total Load = 8 Ohms Casters: N/A Weight & Dimensions Weight: 59 Lbs. (26.76 Kg) Height: 18 1/4&rdquo
- / 46.36 Cm Width: 18 3/4&rdquo
- / 47.63 Cm Depth: 11 1/2&rdquo
- / 29.21 Cm
