
Price updated 4 May 2026, 00:00
Radial Catapult Mini TX and RX Bundle
Best available price
£262.00
1 offer from 1 storeSee all offers ↓
Only available at Gear4music
Free shipping available on the cheapest offer
Fair Price· Near 90-day average
90d Low
£262.00
Best seen
90d High
£262.00
Worst seen
90d Average
£262.00
Baseline
30d Forecast
—
→ Stable
Price History
Stores:
Deep Intelligence Analysis
RSI · Bollinger Bands · Buy/Sell Signal · News
Compare offers
| Price + Ship | Store | Price | Shipping | Stock | Condition | Rating | |
|---|---|---|---|---|---|---|---|
Best£262.00 Free P&P | Best£262.00 | Free | In stock | used | — |
Product Description
- No more messy cable runs Whether youre running long cable runs between your equipment or trying to transmit audio between distant rooms. Radials Catapult Mini system gives you a highly effective and intuitive solution without sacrificing audio quality. Equipped with four XLR connectors that are wired directly to an RJ45 connector the Catapult Mini TX allows you to send four channels of balanced audio to your Catapult Mini RX via a single standard shielded Cat 5 Ethernet cable. This has many benefits. The most obvious is that it dramatically reduces complicated cable runs keeping your venue or workspace tidy and safe. Theres no need for bulky multi-channel audio snakes anymore. The Catapult Mini system lets you transmit your audio over long distances whilst maintaining the original quality of your audio signal. This can be used for both mic and line level signals giving you outstanding versatility when it comes to routing your gear. Features Compact passive audio snakes that enable you to send and receive four channels of analog audio over standard Cat 5 or Cat 6 Ethernet cable Receiver with male XLR connectors for connecting to your mixer interface or recorder Transmitter with female XLR connectors for connecting to either mic or line level sound sources RJ45 input connector for hooking up standard Cat 5 or Cat 6 Ethernet cable Allows you to send and receive mic or line level signals from distant locations without signal loss noise or interference No digital audio conversion is needed your high-quality analogue signal is maintained throughout the signal chain Allows you to utilise standard shielded Cat 5 Ethernet cable which is widely available lightweight and economical Easy to connect the two Catapult modules which then use analog conductors in the cable to deliver four balanced audio lines to any destination Enables you to make use of pre-existing cable installations that are pre-wired for Cat 5 Perfect for transmitting audio between distant rooms without the need to install or supply new cabling Removes the need for bulky and expensive multi-channel audio cable allowing contractors to benefit from pre-installed network cables for connecting rooms Passive design required no power to operate and doesnt require any signal conversion Straight-wire connections from the XLR connectors to the RJ45 connector ensures audio passes through without colouration or distortion Specifications Audio Circuit Type: Passive splitter Frequency Response: 7Hz - 20kHz Dynamic Range: 140dB Total Harmonic Distortion: 0.0005-percent at 1kHz Common Mode Rejection Ratio: Greater than 103dB Maximum Input: +35dBu Input Connector: Male XLR Output Connector: RJ45 Construction: 16-gauge steel chassis and outer shell Power: Passive no power required Dimensions: 105mm x 40mm x 33mm (L x W x D) (each) Weight: 0.4kg (each) Product Code: CATAPULT MINI RX-TX























