Price updated 4 May 2026, 16:00
Sonarworks SoundID Ref Multichannel w Mic
Best available price
£310.00
£479.00-35%3 offers from 2 storesSee all offers ↓
Lowest total price among 2 stores
Free shipping available on the cheapest offer
Strong Buy· 20% below 90d avg
90d Low
£310.00
Best seen
90d High
£459.00
Worst seen
90d Average
£389.33
Baseline
30d Forecast
—
→ Stable
Price History
Stores:
Deep Intelligence Analysis
RSI · Bollinger Bands · Buy/Sell Signal · News
Compare offers
| Price + Ship | Store | Price | Shipping | Stock | Condition | Rating | |
|---|---|---|---|---|---|---|---|
Best£310.00£479.00-35% Free P&P | Best£310.00£479.00-35% | Free | Out of stock | new | — | ||
£422.00 Free P&P | £422.00 | Free | Out of stock | new | — | ||
£457.00 Free P&P | £457.00 | Free | Out of stock | new | — |
Product Description
- Sonarworks SoundID Ref Multichannel w Mic
- Bundle of Measuring Microphone and Software
- For speaker and headphone calibration
- Reference sound for speaker setups from stereo to 9.1.6 Atmos systems
- Frequency response correction for studio monitors and headphones for the most linear reproduction possible
- Enables better assessment of recordings and mixes
- Room analysis and automatic room size calculation using numerous measuring points
- Audio Calibration Engine for the most accurate adjustment possible
- Any number of profiles for speakers can be stored
- Provides calibration curves for over 480 different headphone models
- Target curves can be individually adjusted in real time
- 3 Selectable filter modes: Zero Latency
- Mixed and Linear Phase to optimise filter quality and latency for different listening situations
- Additional settings for mono, dry/wet and safe headroom
- Only available in the app: MIDI mapping for various parameters and user presets for predefined output configurations
- Export of calibration profile to supported hardware
- Measurement microphone with pre-polarised electret condenser capsule
- Frequency range: 20 - 20000 Hz with measurement protocol
- Polar pattern: omnidirectional
- Sensitivity: 14mV / Pa
- Inherent noise: 24 dB
- Signal-to-noise ratio: 70 dB
- Dynamic range: 106dB
- Limiting sound pressure level: 132 dB SPL
- Requires 48V phantom power
- Connector: XLR 3-pin
- Multi-angle calibration curves
