● Live Data
Tascam · Stage Boxes for Digital Mixers
Tascam SB-16D
£2499.00
Buy
2 stores trackedBuy Signal
Favorable conditions for purchase
Confidence: 63/100
RSI (14)
—
Need 15+ data points
Volatility (ann.)
12.0%
Low-moderate
30d Momentum
-1.8%
Sideways →
Price Position
0%
Near 90d Low 🟢
EMA 20
—
EMA 50
—
Need 50+ data points
90d Low / High
£2499
High: £2546.00
30d Forecast
—
→ Stable
Technical Price Chart
◈ AI Recommendation EngineRule-based · v1
Buy
Favorable conditions for purchase
Confidence: 63%
Reasons to Buy
✓Slightly below 90-day historical average (1.1%)
✓Near 90-day low — historically optimal entry point
✓2 stores available — decent price competition
✓Detailed product specifications available — transparent product information
Risks / Watch Out
✗No significant risk factors detected
Product Fundamentals
- Tascam DP-16 SD, Dante Stagebox, Dante-capable stagebox and audio interface with 16 analogue inputs and outputs, Up to 96 kHz sampling rate with 32-bit resolution, Redundant Dante operation with primary/secondary lines, With etherCON-compatible connections, Support for Dante Domain Manager, AES67 compatible, Support of Dante Domain ManagerData transmission compliant with SMPTE 2110, GPIO interface with eight inputs and outputs, Expandable to 16 inputs and outputs when using a Sonicview mixer, Adjustable brightness of the status LEDs, Selectable reference level, Supported operating modes: Redundancy and switchover mode, Fully controllable via Sonicview mixing console, DC input for redundant power supply (power supply unit not included), Remote control and offline editing possible with Tascam IO Control software, Format: 3 U, Dimensions with feet (W × H × D): 454 × 140 × 180mm, Weight: 4.5 kg, Includes power cable, set of rack brackets, set of screws for rack installation, Tascam ID registration guide and operating instructions@+*Analogue inputs/outputs:*, 16x 3-pin XLR mic/line input (balanced) with switchable phantom power (48 V) and status LED for input signal and overload, 16x 3-pin XLR line output (balanced) with status LED for output signal@+*Digital inputs/outputs:*, 1x Dante Primary, 1x Dante Secondary (compatible with etherCON CAT5e), number of audio channels: 64 (48kHz) / 32 (96kHz), 1x GPIO (Sub-D25), Equivalent input noise microphone preamplifier: < -128 dB(A), Frequency range (mic/line or Dante input to line output): 20 - 20,000 Hz, +0 dB / -0.5 dB (48kHz)
- 20 - 40,000 Hz, +0 dB / -1.0 dB (96kHz)
◉ From Our Partner Storescached 1h
Tascam returns to the digital mixer market with Sonicview - tpimagazine.com
tpimagazine.com· 1149d ago
TASCAM Announces the Sonicview Next-Generation Multi-track Recording and Digital Mixing Consoles - audioXpress
audioXpress· 1209d ago
GearDeals Intelligence · Data from 5 historical price points · Analysis is informational only, not financial advice